spring toggles,grawity toggles manufacturer and spring toggles,grawity toggles supplier--China Zhejiang Cixi Bill Fastener Factory

> Plastic Conical Anchor

> Plastic Toggle Anchor

> Plastic Hollow Wall Anchor

> Nylon Nail Anchors

> Cable Clips

> Speed Plug (Nylon)

> Fishlike Anchor (PE or Nylon)

> Split Ribbed Plastic Anchor

> Super Ribbed Plastic Anchor

> Extruded Plastic Plug

> Nylon Frame/Hammer Fixing

> Split Drive Anchors

> Heavy Duty Shield Anchor

> Tie Wire Anchor

> Blister Packing

> Plastic Box

PLASTIC TOGGLE ANCHOR

DESCRIPTION

Plastic toggle anchor, spring toggles, grawity togglesare hollow wall anchors ideal for static applications requiring light to medium load performance. Installation is very fast, needing a pre-drilled 5/16" diameter hole. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. Plastic toggle anchor, spring toggles, grawity toggles are not recommended for use overhead or applications where holding values are critical.
• Allows for fixture and screw removal and re-anchoring
• Fast and easy installation

SPECIFICATIONS

Dimension	Anchor Size
Dimension	Small	Medium	Large
ANSI Drill Bit Size,dbit (in.)	5/16	5/16	5/16
Grip Range (in.)	1/8 to 1/4	3/8 to 1/2	5/8 to 3/4
Recommended Screw Size (UNC)	No.6 to No.14	No.6 to No.14	No.6 to No.14
Anchor Length (in.)	2 1/8	2 1/8	2 1/8

INSTALLATION

Drill 5/16 " diameter hole through base material. Fold anchor in the middle.

Insert the anchor through the wall until Plastic toggle anchor is flush with the wall.

Insert the popper to open the anchor behind the hollow wall (not necessary for thicker base materials). Do not force or strike the Popper with a hammer.

Remove the popper, insert the screw through the fixture and tighten until the fixture is clamped securely to the surface of the base material. Be sure not to overtighten.

anchors