|
|
 |
 PLASTIC TOGGLE ANCHOR |
 DESCRIPTION |
Plastic toggle anchor, toggle, togglesare hollow wall anchors ideal for static applications requiring light
to medium load performance. Installation is very fast, needing a pre-drilled 5/16"
diameter hole. The fastener pre-installs without a screw, allowing for easy placement
and removal of the fixture. Plastic toggle anchor, toggle, toggles, spring toggle, grawity toggle are not recommended for use overhead
or applications where
holding values are critical.
• Allows for fixture and screw removal and re-anchoring
• Fast and easy installation |
 |
| SPECIFICATIONS |
| Dimension |
Anchor Size |
| Small |
Medium |
Large |
| ANSI Drill Bit Size,dbit (in.) |
5/16 |
5/16 |
5/16 |
| Grip Range (in.) |
1/8 to 1/4 |
3/8 to 1/2 |
5/8 to 3/4 |
| Recommended Screw Size (UNC) |
No.6 to No.14 |
No.6 to No.14 |
No.6 to No.14 |
| Anchor Length (in.) |
2 1/8 |
2 1/8 |
2 1/8 |
|
|
| INSTALLATION |
|
|
|
|
|
|
|
| Drill 5/16 " diameter hole through
base material. Fold anchor in the
middle. |
|
|
| Insert the anchor through the wall until
Plastic toggle anchor is flush with the
wall. |
|
|
| Insert the popper to open the anchor behind
the hollow wall (not necessary for
thicker base materials). Do not force or
strike the Popper with a hammer. |
|
|
| Remove the popper, insert the screw
through the
fixture and tighten until the fixture is
clamped securely to the
surface of the base material. Be sure not
to overtighten. |
|
|
|
|
