China Zhejiang Cixi Bill Fastener Factory is a professional manufacturer and exporter of fastener, anchors, iron anchors, plastic anchors, hollow wall anchors, cable clips, plugs, kits, wedge anchors, heavy duty sheild anchors, wall anchor, wall anchors and toggle bolts. With the set of equipment, advanced technique, technologic standdard, first-class product, gauging instrumant and experienced technicians, Our products, wall anchor, wall anchors are well sold domestic and abroad, 90% export to European and American Area. Our quality products, prompt delivery, and competitive pricing have gained us much praise from the customers. |
 DESCRIPTION |
| The plastic hollow wall anchor is a screw actuated hollow wall anchor for use in
paneling, wallboard, and solid masonry. The plastic hollow wall anchor is available
in 6 sizes to match the most common wall thicknesses of hollow base materials. In
solid base materials, the anchor can be used by removing the outer wings. |
 |
| SPECIFICATIONS |
| Dimension |
Anchor Size |
| Mini |
Short |
Medium |
Long |
Extra Long |
Super Long |
| ANSI Drill Bit Size, dbit (in.) |
5/16 |
5/16 |
5/16 |
5/16 |
5/16 |
5/16 |
| Minimum Screw Length (in.) |
1 |
1 1/4 |
1 1/4 |
1 1/2 |
1 3/4 |
2 |
| Screw Size Range |
No.6 -12 |
No.6 -12 |
No.6 -12 |
No.6 -12 |
No.6 -12 |
No.6 -12 |
| Fange Size (in.) |
29/64 |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
| Embed. (Soid Materials) (in.) |
5/8 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
|
|
| INSTALLATION |
|
|
|
|
|
|
|
|
|
| Drill 5/16" diameter hole
through base material. Select
the proper size Plastic hollow
wall anchor based on the wall
thickness. Squeeze the Plastic
hollow wall anchor flat and
push into the hole. |
|
|
| Tap the plastic hollow wall anchor
through the wall until the
flange is seated flush against
the outer wall. |
|
|
| Position the fixture, insert the
screw through the fixture into
the plastic hollow wall anchor,
and tighten until it feels
secure. |
|
|
| Solid base materials – For installations
in solid base
materials, break off the outer
wings. |
|
|
| Squeeze the inner wings flat,
and insert the Plastic hollow
wall anchor into the anchor
hole. Insert the screw through
the fixture and tighten. |
|
|
|
