 DESCRIPTION |
Nylon nail anchors are ideal for a wide variety of light load fastening in wood. hardboard, plaster, metal, cinder block, brick, skate, marble, plastic, tile, glass and concrete, It's unique design allows the nail to expand the anchor uniformly in the hole. nylon nail anchors, express nail anchors
1. The anchor body is manufactured from virgin nylon to withstand high impact or shock loads. And its great tensile strength males it unusually resistant to vibration loads.
2. The nylon is resistant to chemicals, fungus, moisture and other atmospheric conditions. nylon nail anchors, express nail anchors
3. Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°~F + 170°~F.
4. The pin is made of high strength steel and heavily zinc plated for maximum corrosion resistance. |
|
| SPECIFICATIONS |
| Item Code |
Anchor Size |
Box Qty |
Master Qty |
| FFNA3161 |
3/16 X 1 |
100 |
10 |
| FFNA3161112 |
3/16 X 1-1/2 |
100 |
10 |
| FFNA1434 |
1/4 X 3/4 |
100 |
10 |
| FFNA141 |
1/4 X 1 |
100 |
10 |
| FFNA14112 |
1/4 X 1-1/2 |
100 |
10 |
| FFNA142 |
1/4 X 2 |
100 |
10 |
| FFNA143 |
1/4 X 3 |
100 |
10 |
| FFNA144 |
1/4 X 4 |
100 |
10 |
| Item Code |
Anchor Size |
Drill Size |
Screw Size |
| FFNNAL530 |
5 X 30mm |
Ø5mm |
3.5 X 38mm |
| FFNNAL540 |
5 X 40mm |
Ø5mm |
3.5 X 48mm |
| FFNNAL550 |
5 X 50mm |
Ø5mm |
3.5 X 58mm |
| FFNNAL640 |
6 X 40mm |
Ø6mm |
4 X 48mm |
| FFNNAL660 |
6 X 60mm |
Ø6mm |
4 X 64mm |
| FFNNAL680 |
6 X 80mm |
Ø6mm |
4 X 88mm |
| FFNNAL860 |
8 X 60mm |
Ø8mm |
5 X 65mm |
| FFNNAL880 |
8 X 80mm |
Ø8mm |
5 X 85mm |
| FFNNAL8100 |
8 X 100mm |
Ø8mm |
5 X 105mm |
| FFNNAL8120 |
8 X 120mm |
Ø8mm |
5 X 125mm |
| FFNNAL10100 |
10 X 100mm |
Ø10mm |
7 X 110mm |
| FFNNAL10135 |
10 X 135mm |
Ø10mm |
7 X 145mm |
| FFNNAL10160 |
10 X 160mm |
Ø10mm |
7 X 170mm |
|
 |
|
| INSTALLATION |
|
|
|
| Using the proper diameter bit,
drill a hole into the base material
to a depth of at least 1/4"
deeper than the required
embedment. The tolerances of
the drill bit used should meet
the requirements of ANSI Standard
B212.15. Blow the hole
clean of dust and other
material. |
|
|
| Insert the anchor through the
fixture. Drive the nail into the
anchor body to expand it. Be
sure the head is seated
firmly against the fixture and
that the anchor is at the
proper embedment. This anchor
is not recommended for
use overhead. |
|
|
|
